buyer questions

Skid Steer Power Rake: Replacing Teeth, Hookup and Controls

1 min readChupp Industrial

The teeth on our skid steer power rake are welded on, so a broken tooth is replaced by welding a new one back on.

Chupp Industrial sells a skid steer power rake, also called a soil conditioner, and owners ask us how to replace its teeth, how to hook up a hydraulic line that will not connect, and how the controls work on a Raytree 6-in-1 power rake bucket. Each answer below comes from those questions.

Can you replace the teeth on a skid steer power rake?

Yes. The teeth on our power rake are replaceable. The teeth are welded on, so if a tooth breaks off, you weld a new tooth back on.

Why won't the power rake's hydraulic line snap onto the skid steer coupler?

If a hydraulic line on the power rake will not snap onto the skid steer coupler, release some of the pressure before you try again:

  1. Make sure the skid steer is off when you hook up the power rake's line.
  2. Move the hydraulic lever back and forth to release some of the pressure.
  3. Try to connect the hydraulic line again.

Why don't the controller buttons open the Raytree 6-in-1 power rake bucket?

The clam on a Raytree 6-in-1 power rake bucket is the part of the bucket that opens and closes, and the clam only moves while the machine is running with continuous hydraulic flow and the drum is going. The Raytree bucket is all hydraulic and comes with a controller that has left and right buttons. The controller connects to the solenoid on the attachment with two connectors, so check that both connectors are plugged in. Once both connectors are plugged in and the drum is running, the controller buttons open and close the clam.

Questions about a power rake for your skid steer? Tell us what machine you run.

Questions on the right machine for the job?

Straight answers on stock, freight, and what actually fits — no pressure.