AGT No-Till Seed Drill: Seed, Seeding Rate, Depth, Tractor Fit
The AGT no-till seed drill suits larger seed and native grasses, sets its rate by ground speed, and runs off a tractor's rear hydraulics instead of the PTO.

A no-till seed drill plants seed straight into the ground without tilling first. At Chupp Industrial, we sell the AGT no-till seed drill direct, so you can buy it from us without going through a dealer. Here is what the AGT drill will plant, how its seeding rate is set, how deep it plants and what tractor it needs.
What seed will a no-till seed drill plant?
The AGT drill is built for larger seed such as soybeans, corn and wheat. It is also suited to native grasses, pollinator blends and wildlife forage mixes.
Can the AGT drill plant alfalfa?
Alfalfa is not a great fit. The AGT drill has no small seed box, and tiny seed like alfalfa would probably be too hard to meter through it.
How do you set the seeding rate on the AGT drill?
The seeding rate changes with ground speed. The faster you drive, the faster the drill drops seed; drive slower and it drops seed more slowly.
How deep does the AGT drill plant, and should you till first?
The AGT drill presses seed in about an inch. Even though it is called no-till, a partial till on the ground before you make a pass with the seeder is still a good idea. It is the same ground prep you would do before planting anything.
What tractor does the AGT seed drill need?
The AGT drill fits any tractor with a three-point hitch and rear hydraulic outlets. It runs off the tractor's hydraulics, not the PTO. We don't sell tractors at Chupp Industrial, so check the hitch pin size against your tractor's manual before you order.
Questions on the right machine for the job?
Straight answers on stock, freight, and what actually fits — no pressure.



