buyer questions

Hydraulic Hammer Fit: Pin Size, Spacing and Excavator Tonnage

2 min readChupp Industrial

Before you buy a hydraulic hammer, check that its pin size, pin spacing and rated tonnage range all match your excavator.

Chupp Industrial sells hydraulic hammers, also called breakers, for excavators. Before you order a hydraulic hammer, the first thing to settle is whether it will fit your machine.

How do I know a hydraulic hammer will fit my excavator?

A hydraulic hammer fits when its pin size and its center-to-center pin spacing match your excavator; those are the two most important measurements. If either measurement is off, the hammer will not work on your machine unless it is modified to fit.

Hammers are also sized to a weight range of excavator, so the hammer's tonnage range has to match your machine as well.

Will a mini hydraulic hammer fit a 40 hp mini excavator?

No. Our mini hydraulic hammer has 25 mm pins and is made for 1.3-ton machines. A 35 to 40 horsepower excavator is a much heavier machine, roughly four times the size of the 1.3-ton machine our mini hammer is made for, so the mini hammer is far too small for it.

Is a 7 to 10 ton hydraulic hammer different from the SB45?

No - the hydraulic hammer rated for 7 to 10 ton excavators and the SB45, a hydraulic hammer rated for 7 to 14 ton excavators, are pretty much identical. The difference on paper is the top of the rated range, so check which range your excavator falls in.

How heavy is the ALS1000 hydraulic breaker?

The ALS1000 hydraulic breaker weighs roughly 2,000 pounds with the pin in, and that weight is an estimate from our team's check, not a measured figure.

What wears out on a hydraulic hammer?

The part customers usually call us to replace on a hydraulic hammer is the chisel, also called the bit.

Tell us your excavator's tonnage and pin size, and we will help you match a hammer to it.

Questions on the right machine for the job?

Straight answers on stock, freight, and what actually fits — no pressure.