LOT OF JASCO HPLC ( MD-2018 , AS-2059-SF , PU-2080 , BP-2080 , HC-2068-08 , ETC)

JASCO 2000-Series HPLC System — 7 Modules — Sold As-Is

Complete dual-channel JASCO LC stack removed from a working laboratory environment. All modules are physically intact with clean front panels, undamaged displays, and no visible corrosion or leak damage.

INCLUDED MODULES

JASCO MD-2015 Plus Multiwavelength Detector — S/N B016660871 — Photodiode array detector, wavelength range 195–650 nm, multi-channel chromatogram output. Conic (semi-micro) flow cell installed. AC 100–240V, 50/60 Hz, 230 VA, Class I.

JASCO FP-2020 Plus Intelligent Fluorescence Detector — S/N B091060869 — Xenon lamp source, excitation and emission monochromators, LD flow cell installed. AC 100–240V, 50/60 Hz, 425 VA, Class I.

JASCO AS-2059 Plus Intelligent Sampler — S/N A016960876 — Programmable autosampler with variable injection volume and integrated T-2059 temperature control unit for sample cooling. Rear panel temp coefficient offset −1.758 / factor 1.2068. AC 100–240V, 50/60 Hz, 160 VA, Class I.

(2) JASCO PU-2089 Plus Quaternary Gradient Pumps — Four-solvent low-pressure gradient pumps with integrated 4-line degasser (inlet ports A/B/C/D). RS-232C and dual LC-Net connectivity, event/valve/low-pressure-gradient outputs.

(2) JASCO CO-2065 Plus Intelligent Column Ovens — S/N B088260880 and A075360880 — Peltier-controlled column ovens with programmable temperature control and column-change signaling. AC 100–240V, 50/60 Hz, 250 VA each, Class I. Voltage selector set to 115V (T5A fuse).

CONDITION

Sold as-is . These units have not been powered on, flow-tested, or calibrated. Lamp hours on the MD-2015 and FP-2020 are unknown. Normal cosmetic wear consistent with laboratory use, including minor scuffs and small paint marks on some housings. Photos show the exact modules you will receive. I will say that these were pulled from the University of Oklahoma Research Facility and they have taken great care of them.

TERMS

Exact items shown. No returns on industrial and laboratory equipment. For freight deliveries, any damage must be noted on the delivery receipt and reported within 48 hours of delivery.

There is a flat rate $150 shipping charge for this item. This will be shipped via UPS Ground.