Fluke FTK200 Optical Fiber Test Kit FM150 Fiber Meter FS150 Source w/ Case

Fluke FTK200 Optical Fiber Test Kit with FM150 fiber meter, FS150 fiber source, hard carrying case, fiber optic patch cables/adapters, documentation, and additional accessories shown.

The FTK200 is designed for testing optical power and optical loss on fiber-optic cabling. The included FM150 Fiber Meter supports measurements at 850 nm, 1300 nm, 1310 nm, and 1550 nm and can display optical power in dBm or µW. It can store up to 500 measurements per wavelength and includes a serial interface for transferring stored measurements. https://usersmanualguide.com

The included FS150 Fiber Source is intended for multimode fiber testing and provides 850 nm and 1300 nm outputs. Fluke specifies nominal output of approximately -20 dBm into 62.5 µm multimode fiber with an ST connector. manualzz.com Included

Fluke FTK200 Optical Fiber Test Kit

Fluke FM150 Fiber Meter

Fluke FS150 Fiber Source

Hard carrying case

FTK200 documentation/manual

Multiple fiber-optic patch/test cables

ST/PC and other adapters/connectors shown

RS-232/interface cable

Black fiber-optic coupler/accessory marked for use with Corning VFL-350

Patchcord test reports/documentation shown

All other accessories pictured

Fluke's original FTK200 configuration included the FM150 meter, FS150 source, multimode patch cords/test jumper, ST/ST adapter, RS-232 cable, documentation, and hard carrying case. https://usersmanualguide.com Condition

Used.

The equipment shows normal cosmetic wear from previous professional use. The FS150 has writing on the front reading “MULTI MODE ONLY.” The hard case has noticeable scratches, scuffs, wear, and residue from storage/use.

Testing status: Unless you have personally verified operation, I would list this as untested and state that no full fiber-optic performance or calibration testing has been performed.

The FM150 has an older calibration sticker visible. Any calibration dates or test reports included should be considered historical only. Current calibration is not guaranteed .

Please review all photos carefully for exact cosmetic condition, included accessories, connector types, and configuration. Only the items shown in the photos are included.

Technical Highlights

Kit: FTK200

Fiber Meter: FM150

Measures optical power/loss

Supported meter wavelengths: 850 / 1300 / 1310 / 1550 nm

Measurement display: dBm / µW / dB loss

• Stores up to 500 measurements per wavelength
• Serial data interface

Fiber Source: FS150

FS150 wavelengths: 850 nm / 1300 nm

• Infrared LED source
• Designed primarily for multimode fiber testing
• ST connectivity