TOFT

TOFT equipment at Chupp Industrial — excavator attachments. In stock in Chouteau, Oklahoma and shipped nationwide.

2 TOFT Products For Sale

2 products

Yellow TOFT750 hydraulic breaker with black mount bracket, spare moil chisel, wrench box, nitrogen charge kit and manual
TOFT

TOFT 750 Hydraulic Hammer (7–10 Ton)

Up for sale is a Toft 750 Hydraulic Breaker Hammer, a powerful and reliable attachment designed for mid-size excavators. This unit is ideal for concrete demolition, trenching, rock breaking, and general excavation work.

$2,999.99
0% APR — as low as $250/mo
Yellow TOFT 530 hydraulic breaker cutout with hoses, spare moil tool, wrench box and nitrogen gauge kit
TOFT

TOFT 530 Hydraulic Hammer (2–5 Ton)

New TOFT 530 pin-on hydraulic hammer for 2 to 5-ton mini excavators, built to break concrete, rock, footings and frozen ground.

$2,499.99
0% APR — as low as $209/mo

What we carry from TOFT

We carry two TOFT hydraulic breakers, both in our excavator attachments category. They differ mainly by the size of the excavator they are built for.

  • TOFT 530: a pin-on hydraulic breaker sized for 2 to 5 ton mini excavators.
  • TOFT 750: a hydraulic breaker for mid-size excavators in the 7 to 10 ton class. It suits concrete demolition, trenching, rock breaking and general excavation.

How to choose between them

Start with your carrier. Match the hammer to your excavator's weight class, because that is how both are listed.

  • Under 5 tons: the TOFT 530 is the one listed for 2–5 ton mini excavators.
  • 7 to 10 tons: the TOFT 750 is the match.
  • Between classes (5 to 7 tons): neither listing covers this range. Check your machine's specs before ordering, and don't assume either hammer fits.

The TOFT 750 listing gives these specs:

  • Impact rate: 500–900 BPM
  • Hydraulic flow: 13–24 GPM (36–60 L/min)
  • Working pressure: 1600–2500 PSI (120–170 Bar)
  • Operating weight: approx. 948–950 lbs
  • Pin size: 50mm
  • Chisel diameter: 68mm–75mm (about 2.7 inches)

What to check before you buy

  • Compare your excavator's hydraulic flow and pressure with the hammer's range. The 750's figures are above.
  • Confirm the mounting. The 530 is a pin-on design. The 750 lists a 50mm pin size, so check it against your coupler or stick setup.
  • The listing for the 530 gives no flow, pressure or weight figures. Ask us for them if you need them before you decide.
  • Make sure your machine has the auxiliary hydraulic lines a breaker needs.

Buying and shipping

Both hammers can be financed. We ship nationwide by freight from Chouteau, Oklahoma, near Tulsa. To see other attachments for your machine, browse our excavator attachments.