Groen (2)SSB-5E SmartSteam Double Stack Boilerless Steamer 10 Pan 208V 3PH Used

Groen (2)SSB-5E SmartSteam100 Double Stacked Boilerless Convection Steamer — 208V 3-Phase, 10 Pan Capacity

Used commercial double-stacked electric convection steamer, stand-mounted, pulled from a working facility. Stainless steel interior and exterior. Each cavity has its own independent control panel (Manual / Timed / Stop / Cancel with Ready indicator, timer knob, and On/Off rocker) and its own hour meter.

Specifications

Manufacturer: Groen (A Dover Company / Unified Brands), Jackson, MS

Model: SSB-5E (two units, stacked on open-leg stand)

Serial: 086141T-1-1 (upper unit tag)

Date code: 2008

Voltage: 208V, 3 Phase, 50/60 Hz

Power: 12 kW per compartment (24 kW total)

Amperage: approx. 33.3A per compartment, 3PH

Blower motor: 1/15 HP, 208/240V, 0.4A each, 1PH

Capacity: (5) 12" x 20" x 2-1/2" full-size pans per compartment — 10 pans total

Steam system: boilerless atmospheric steam-generating reservoir with side-mounted convection blower

Water connection: 3/4" cold water inlet (untreated water supply, 30–60 PSI)

Drain: 1-1/2" drain connection with 1" minimum air gap required

Power connection: each compartment has its own cord with Hubbell twist-lock plug (3-pole, 4-wire grounding style — buyer should verify receptacle match before install)

Approx. dimensions: 22" W x 36" D x 65" H

Approx. weight: 555 lbs

Certifications: UL Listed 161H Commercial Cooking Appliance, NSF (D049558)

Hour Meters

Upper compartment: 09082.5 hours

Lower compartment: 06103.5 hours

Condition

Used. Cosmetic wear consistent with commercial kitchen service — scuffing and scratching to stainless panels, wear to control panel overlays, minor surface marks. Exact item shown in photos. Photos are the most accurate description of condition. Sold as-is. No pans or pan racks included unless shown.

Important Notes

This unit requires 208V 3-Phase power. Confirm your electrical service before purchasing.

Requires cold water supply and a floor drain connection with proper air gap.

Manufacturer requires 2" minimum side clearance and 6" minimum rear clearance.

No returns on industrial and commercial equipment.

Freight damage must be noted on the delivery receipt and reported within 48 hours.

Shipping

There is a flat rate $399.99freight shipping charge for this item to a commercial business address with dock or forklift available. If you do not have a commercial location we can ship to a local freight terminal in your area where you can pick up at your convenience for the flat rate shipping fee. If you would like this shipped to a residential or an address that is considered "limited access" (which means it will be a challenge for an 18-wheeler to navigate) there will be an additional $100 freight charge. If you do not have a dock or a forklift to unload and are in need a lift gate delivery truck there is an additional $100 charge.